Sport Archery » Archery Bows » Custom FITA recurve limbs

Custom FITA recurve limbs

Question:

Does anyone know of a source for custom recurve limbs for a hoyt GM riser?  I have been out of the sport for a while (okay the GM was the only choice then)and I’m looking to replace all of my equipment. I have hoyt foam limbs now but they’re showing their age… Thanks,

Response:

> Does anyone know of a source for custom recurve limbs for a hoyt GM > riser?  I have been out of the sport for a while (okay the GM was the > only choice then)and I’m looking to replace all of my equipment. I > have hoyt foam limbs now but they’re showing their age… > Thanks,

Border will build very nice limbs to your spec. They’ll do pretty much any draw weight, and up to 72" limbs on 25" riser. And the best bit, if you go for the custom builds, you specify the weight at your drawlength. E.G. 51# at 32.5". (Real example. He’s a freak.) 7om

Response:

>Does anyone know of a source for custom recurve limbs for a hoyt GM >riser?  I have been out of the sport for a while (okay the GM was the >only choice then)and I’m looking to replace all of my equipment. I >have hoyt foam limbs now but they’re showing their age…

Why do you need custom?  Right now there are so many limbs in various price ranges that will fit a GM that I can’t see why you would need custom limbs.   Alex     __O        _-<,_       (_)/ (_)

Response:

Fully support this The Hoyt limb fiximg design has become almost universal and most suppliers have some or all of their limbs as ‘International’ fitting ie Hoyt! so : Anything is available from $100 Korean Starter limbs to see what your needs are to $600 top of the range Carbon Multi layer Limbs. And the top spec Korean limbs ( Win & Win or Samick) are very good as are Hoyts and the independants Border and KG ! And Border WILL make you some very nice custom limbs for the price, as will KG. If you want to see the possibilities why not look at http://www.altservices.co.uk/ http://www.bowsports.com/ http://www.quicks.com/ http://www.borderbows.com/ http://www.kgarchery.com/ My list is UK oriented but they will ship overseas Good luck Dave

– Hide quoted text — Show quoted text ->Does anyone know of a source for custom recurve limbs for a hoyt GM >riser?  I have been out of the sport for a while (okay the GM was the >only choice then)and I’m looking to replace all of my equipment. I >have hoyt foam limbs now but they’re showing their age… > Why do you need custom?  Right now there are so many limbs in various price > ranges that will fit a GM that I can’t see why you would need custom limbs. > Alex     __O >        _-<,_ >       (_)/ (_)

Response:

>Why do you need custom?  Right now there are so many limbs in various price >ranges that will fit a GM that I can’t see why you would need custom limbs.  

As Tom correctly pointed out, Vladimir may have very specific draw weight or length requirements. Border is the place to get that done. I was gutted, however, when they refused to make a set of limbs for my stylist ( Glad I switched to the Radian though ;o)

Response:

Related Posts

Write a comment